Air conditioning is designed and developed specifically for a variety of cold Laboratory environmental products.
Precision constant temperature and humidity in the laboratory: the control precision of temperature: 18-28 degrees, + 1 DEG C; humidity control accuracy: 40%RH-60%RH + 5%RH.
Precision constant temperature and humidity in the laboratory: the control precision of temperature: 18-28 degrees, + 0.5 DEG to - 0.3 DEG C; humidity control accuracy: 40%RH-60%RH + 2%RH.
main features
1 constant temperature and humidity air conditioning is in air cooling direct evaporation type DLA/FLA.
2 in order to ensure the regulation of cooling capacity, the use of compressor heat bypass and electric heating control measures to achieve a constant room temperature.
3. The standard configuration of secondary electric heater,, large heat dissipation area, effectively avoid ionization effect; with thyristor stepless regulation of small linear heating inert material, achieve proportional integral control, small inertia, heating, cooling rapidly, can quickly reach the purpose of heating,
The electric heater is automatically adjusted between 0%-100% with the change of temperature. The electric heater is equipped with a safety thermal protector to ensure the safety and stability of the operation.
4 standard configuration and type of electrode type humidifier, quick clean steam, no phenomenon. To reach the national level constant temperature and constant humidity laboratory standards, can be equipped with electric proportional integral type steam humidifier, humidifier with independent controller, built-in humidity evaporator.
To achieve the proportional integral humidification, control precision, and the equal distribution of the desiccant double system to achieve constant humidity control.
5. With ordinary tap water can be realize humidification precision is less than or equal to + 2%Rh; such as the use of completely deionized water and humidity control precision can reach + 1%Rh, electric proportional integral type steam humidifier built-in thermostat system, to ensure that the on / off regulation quickly reached the required amount of humidification.
6. In the high precision constant temperature and humidity in the laboratory setting the advanced high sensitivity sensor (accuracy + / - 1Rh); data acquisition and processing, to ensure the control precision of the constant temperature and humidity system to meet the requirements of the temperature and humidity of the indoor environment.
The 7 level standard by constant temperature and humidity air conditioning refrigeration, heating, humidification dehumidification centralized control, independent control. Refrigeration, heating, humidity control and humidity independent control of each other, mutual constraints, the two control system with the work of precision
Control temperature and humidity.
8 independent temperature control, refrigeration, heat compensation for each other, proportional integral control, precise control of temperature.
9 independent humidity control, humidity and humidity are compensated by each other, proportional integral plus controlled silicon control, precise control of humidity.
. independent temperature control, independent control of the wet joint control completely solve the ordinary thermostatic and humidistatic air-conditioning refrigeration, heating, humidification and dehumidification micro air gap, this mode of refrigeration, heating, humidification and dehumidification can line into four continuous operation curve, achieve uninterrupted dynamic balance.
The temperature and humidity control.
11. Constant temperature and humidity air conditioner realize modularization and all types of unit height and thickness, width of only different